display, hard disk and peripherals, but maintains power to the computer's
memory so you don't lose your work.
•
Tap the Sleep button (
•
To wake Vista® out of sleep mode, slide the HOLD switch that is
located on the right side of the Mobile Computer.
Tips
• To configure sleep mode settings, open Power Options in Windows
Vista®'s Control Panel. Select a power plan first and then tap Change plan
settings.
• Windows Vista® also provides a hybrid sleep feature that saves data in
both the memory and the hard disk to ensure that data will not be lost
when power outage occurs. See Windows Vista® Help for details.
To enter hibernate mode
Hibernate mode is a power-saving feature that saves the current state of
Windows Vista® to the hard disk and then shuts down the Mobile Computer.
To resume from hibernate mode, you have to turn the power back on.
•
To enter hibernate mode, tap
menu, then tap Hibernate.
•
To resume from hibernate mode, slide and hold the HOLD switch for
about 2 seconds.
Tip
To configure hibernate mode settings, open Power Options in Windows
Vista®'s Control Panel. Select a power plan, tap Change plan settings, tap
Change advanced power settings, then tap Sleep to be able to see and
change hibernate mode settings. See Windows Vista® Help for details.
Advanced Settings
Tapping the Advanced Settings button opens a dialog box which allows
you to reset SnapVUE mode, install e-mail certificates, and configure certain
settings.
The following table describes the various options that you will find in the
Advanced Settings dialog box.
Operating in Windows Vista® 47
) to enter sleep mode.
to open the Shut Down Options