Component Identification - M-system R7L-YV2 Instruction Manual

COMPONENT IDENTIFICATION

Service SW
Status Indicator LED
■ STATUS INDICATOR LED
ID COLOR STATE
ON
PWR Green
OFF
ON
Blink
approx.
0.5 Hz
ONLINE Green
Blink
approx.
2 Hz
OFF
ON
ERR Red
Blink
OFF
ON
TX/RX Green
OFF
ON
Blink
SVCE Green approx.
0.5 Hz
OFF
■ INDICATOR LED
Used to show network variable status assigned to fbLED.
ON : LED ON
OFF : LED OFF
■ SERVICE SWITCH
Used to identify the node in L
tion.
■ RESET SWITCH
Used to reset the Neuron Chip. Press the switch behind the
front cover to reset.
Control functions are halted while completing resetting and
restarting. Confirm no danger before conducting resetting.
Reset SW
PWR ERR SVCE
TX/RX
ONLINE
4 5 6 7
1 2 3
L W , Power Supply
ON ORKS
Terminals
MEANING
Internal 5V is normal
Internal 5V is abnormal.
Online
Offline
Sending/receiving of Net-
work
Variables has stopped.
Receiving Wink Message
Abnormal state
Writing in the non-volatile
memory
Abnormal state
Normal state
Sending/receiving Network
Variables
Communication is lost.
No network information
Offline
Sending/receiving of Net-
work
Variables has stopped.
Normal state
W network configura-
ON ORKS
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
Factory Configuration Port
Indicator LED
0 1 2 3 4 5 6 7 8 9 A B C D E F
6 7 8 9 10
1 2 3 4 5
Output Terminals
■ POWER SUPPLY, L W
ON ORKS
4 5
NET1 NET2
1
NET1
NO. ID
1 NET1 L
ON
2 NET2 L
ON
3 FG FG
4 NET1 L
ON
5 NET2 L
ON
6 U (+) Power input
7 V (–) Power input
Note: L W wiring must be paired between NET1 termi-
ON ORKS
nals and/or NET2 terminals.
■ OUTPUT TERMINAL ASSIGNMENT
6 7
NC VH0
1 2 3
NC COM0
NO. ID FUNCTION
1 NC No connection
2 COM0 Common 0
3 COM0 Common 0
4 COM1 Common 1
5 COM1 Common 1
■ OUTPUT RANGE
• Wide span: -10 – +10V DC, -5 – +5V DC, 0 – 10V DC,
0 – 5V DC, 1 – 5V DC
• Narrow span: -1 – +1V DC, 0 – 1V DC, -0.5 – +0.5V DC,
0 – 0.5V DC
R7L-YV2
TERMINAL ASSIGNMENT
6 7
U (+) V (–)
2 3
NET2 FG
FUNCTION, NOTES
W communication 1
ORKS
W communication 2
ORKS
W communication 1
ORKS
W communication 2
ORKS
8 9 10
VL0 VH1 VL1
4 5
COM0 COM1 COM1
NO. ID FUNCTION
6 NC No connection
7 VH0 Wide span volt. 0
8 VL0 Narrow span volt. 0
9 VH1 Wide span volt. 1
10 VL1 Narrow span volt. 1
EM-7804-D Rev.5 P. 2 / 16