M-system R7L-YV2 Instruction Manual page 10

• Configuration Properties
CONFIGURATION NETWORK
PROPERTY VARIABLE
SCPTsceneNmbr ----
SCPTsetpoint[0] nviYVVal
SCPTsetpoint[1] nviYVVal
SCPToffset nviYVVal
SCPTgain nviYVVal
TYPE
{ Range }
{ Default }
{}
{0...8}
{0}
{SNVT_lev_percent}
{-15.000...115.000}
{0.0}
{SNVT_lev_percent}
{-15.000...115.000}
{100.0}
{SNVT_lev_percent}
{-15.000...115.000}
{0.0}
{SNVT_muldiv
(mulplier,divisor)}
{0...32000,10000}
{10000,10000}
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EXPLANATIONS
Output range for Output 0 and 1
0 : -10.00 to 10.00 V
1 : -5.00 to 5.00 V
2 : -1.00 to 1.00 V
3 : 0.00 to 10.00 V
4 : 0.00 to 5.00 V
5 : 1.00 to 5.00 V
6 : 0.00 to 1.00 V
7 : -0.500 to 0.500 V
8 : 0.000 to 0.500 V
nviYVVal lower range voltage in % of the output range.
SCPTsetpoint[0] < SCPTsetpoint[1]
nviYVVal upper range voltage in % of the output range.
SCPTsetpoint[0] < SCPTsetpoint[1]
nviYVVal zero (offset) adjustment.
Added to the calculation result with SCPTsetpoint[0,1] and
SCPTgain.
nviYVVal span (gain) adjustment.
Gain = Multiplier / 10000 (Divisor is fixed at 10000.)
Applied to SCPTsetpoint[0,1].
R7L-YV2
EM-7804-D Rev.5 P. 10 / 16