Table of Contents
Advertisement
12 MAINTENANCE AN CLEANING
We recommend regular servicing by a SMEG authorised service centre at least once a year, to guarantee
optimal performance at all times.
Consumables (e.g. peristaltic pump hoses) and/or parts subject to wear and tear must be replaced with
genuine SMEG parts.
N.B.: the manufacturer accepts no liability for wilful damage or damage deriving from carelessness,
neglect, failure to comply with instructions, regulations and standards or incorrect connections, which lead
to forfeiture of warranty cover.
The dishwasher has IPX4 protection, but the use of direct water jets for cleaning is forbidden.
Remove the filters (simply lift them out as shown here), taking care that
no large residues fall into the sump underneath. Clean them to remove
residues and rinse with plenty of water, then put them correctly back in
place; do not use sharp or pointed tools.
Clean away any limescale deposits to prevent excessive build-ups;
If possible, leave the hood or door ajar when not in use;
Clean surfaces thoroughly and often with a damp cloth; use neutral,
non-abrasive detergents which do not use chlorine compounds, which
corrode and damage stainless steel.
Do not use the products mentioned above even when cleaning the floor underneath or in the vicinity of the
dishwasher, to ensure that fumes or drops cannot damage the steel surfaces.
32
Advertisement
Table of Contents
