9.4 Program change
N.B.:
During heating of the water in the boiler and tank with the cycle running, the tank heating element
and boiler heating element
Tank heating does not start until heating of the boiler is completed.
Filter presence sensor (on some models only)
The filter is fitted with a sensor which checks that it is properly fitted; if it is not in the correct position, the
word "FiLTER" appears on the display.
symbols may appear on the display.
29
With program started, press
to interrupt it.
Change the program by pressing
Confirm the program start by
it down for 1 second (light L2 turns blue again).
and hold it down
pressing and hold