KitchenAid YKFID500ESS User Instructions page 18

The range is designed to not need the oven doors removed for
■
standard usage and cleaning, however, they can be removed if
necessary.
Do not lift or move the range by the door handle(s).
■
Prepare a surface where you will place the door(s). This
■
surface should be flat and covered with a soft blanket, or use
the corner posts from the packaging material.
A. Oven door hinge in the
locked position
B. Oven door hinge in the
unlocked position
Partially close the door to engage the
door latch locks. The door will stop at this
point.
18
Remove Oven Door(s)
A
B
■
■
Use two hands to remove and replace the oven
door(s). It may be necessary to gently shift door
from side to side.
A. Slot in the oven frame for the
door hinge lock
To replace the oven door(s), locate the slots in the oven cavity
for the hinge locks and repeat the steps above in reverse
order. Make sure the door closes properly and there is no
interference from the door latch. If necessary, remove the
door and repeat the steps above. If power is connected to the
range, open and close the door to make sure the oven light
comes on and goes off appropriately.
Follow the installation instructions found in the bag containing
the literature.
A