Names And Functions Of The Operating Section - Daikin DCS302C51 Operation Manual

NAMES AND FUNCTIONS OF THE OPERATING SECTION (Fig. 1, 2)
UNIFIED OPERATION BUTTON
1
Press to operate all indoor units.
UNIFIED STOP BUTTON
2
Press to stop all indoor units.
OPERATION LAMP (RED)
3
Lit white any of the indoor units under control is
in operation.
" " DISPLAY (REFRIGERANT
SYSTEM DISPLAY)
4
This indication in the square is lit while the
refrigerant system is being displayed.
5 " " DISPLAY (ZONE SETTING)
The lamp is lit while setting zones.
" " DISPLAY (OPERATION
6
MONITOR)
The lamp is lit while operation is being monitored.
" " " " "
ALL
The status displays indicates either batch
7
functions or which zone or individual unit
(or group) are being used.
OPERATION MONITOR
8
Each square displays the state corresponding to
each group.
" " " " " " "
9
DISPLAY (OPERATION MODE)
Displays operating state.
" " " " "
(VENTILATION CLEANING DISPLAY)
10
This is displayed when a Ventiair total enthalpy
heat exchanger unit or other such unit is
connected.
TEST
" " DISPLAY (INSPECTION/TEST)
11
Pressing the maintenance/test run button
(for service) displays this. This button should not
normally be used.
" " DISPLAY (TIME TO CLEAN)
12
It lights up when any individual unit (group) has
reached the time for the filter or element to be
cleaned.
5
" DISPLAY
INDIVIDUALLY
" " " " " " "
" " " DISPLAY
" " DISPLAY (COOLING/HEATING
SELECTION PRIVILEGE NOT SHOWN)
13
For zones or individual units (groups) for which
this is displayed, cooling and heating cannot be
selected.
" " DISPLAY (UNDER HOST
COMPUTER INTEGRATED CON-
TROL)
14
While this display is lit up, no settings can be
made. It lights up when the upper central
machines are present on the same air
conditioning network.
" " DISPLAY
C
SET
15
(PRESET TEMPERATURE)
Displays the preset temperature.
" " DISPLAY (MALFUNCTION
CODE)
16
This displays (flashes) the content of errors
when an error failure has occurred.
In maintenance mode, it displays the latest error
content.
"NOT AVAILABLE" DISPLAY
(NO FUNCTION DISPLAY)
17
If a function is not available in the indoor unit
even if the button is pressed, "NOT AVAILABLE"
is may be displayed for a few seconds.
" " DISPLAY
(FAN DIRECTION SWING DISPLAY)
18
This displays whether the fan direction is fixed
or set to swing.
" " " " " " "
H H
L
DISPLAY (VENTILATION
19
STRENGTH/SET FAN STRENGTH
DISPLAY)
This displays the set fan strength.
" " DISPLAY (TIME NO.)
No.
20
Displays the operation timer No. when used in
conjunction with the schedule timer.
FRESH UP
" " " "
HH
English
"