Table of Contents
Advertisement
OPERATION MODE
The following five operation control modes can be selected along with the temperature setting and operation mode
by remote controller, for a total of twenty different modes. These twenty modes are set and displayed with control
modes of 0 to 19. (For further details, see EXAMPLE OF OPERATION SCHEDULE on the next page.)
• ON/OFF control impossible by remote controller..... Use this mode when operating and stopping from the
• Only OFF control possible by remote controller ...... Use this mode when executing the operation only by the
• Centralized............................................................... Use this mode when executing the operation only by the
• Individual ................................................................. Use this mode when executing start/stop both by central
• Timer operation possible by remote controller......... Use this mode when executing start/stop by remote con-
[HOW TO SELECT THE CONTROL MODE]
• Select whether to accept or to reject the operation from the remote controller regarding the operation, stop, tem-
perature setting and operation mode setting, respectively, and determine the particular control mode from the
rightmost column of the table below.
Example
Operation by remote
controller (at time of
unified operation by
centralized control)
[Rejection]
11
Operation by remote
Stop by
controller (at time of
remote
unified operation by
controller
centralized control)
[Rejection]
[Rejection] [Acceptance]
central remote controller only. (ON/OFF control by the
remote controller is disabled.)
central remote controller, and executing only the stop by
remote controller.
central remote controller, and executing start/stop freely
by remote controller during the preset hours.
remote controller and remote controller.
troller during the preset hours, and not starting operation
by the central remote controller at the programmed time
of system start.
Temperature
Operation
control by
mode setting
remote
by remote
controller
controller
[Acceptance]
The control
mode is " 1 ".
English
Advertisement
Table of Contents
