Setting Start-Up Mode - Samsung VP-M2100S Owner's Instruction Book

ENGLISH
Setting the CAM : Setting the System

Setting Start-up Mode

You can select the starting mode displayed when you turn the CAM on.
1. Move [POWER/MODE Selector] down to turn on the CAM.
N
The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to select
and press the [OK] button.
N
The system is automatically converted into the selected mode in two seconds even
when the [OK] button is not pressed.
N
The System Settings menu appears.
3. Move the [W/T] button to select <System> and press the [√] button.
4. Move the [W/T] button to select <Start-up> and press the [√] button.
5. Move the [W/T] button to set the desired setting and press the [OK] button.
N
Video Mode: The CAM starts up in the Video Mode.
N
Previous Mode: The CAM starts up in the mode you used last.
Notes
✤
If you select [œ ] button in the menu, the previous menu appears.
✤
After you finish setting, press the [Record/Stop] button to exit from the menu screen.
✤
Make sure that the start-up mode is set to the selected mode when turning on the CAM again.
98 98
System Settings mode
2
F / 720i
System Settings
00:00:00 / 00:43:41 STBY
3 System Settings System Settings
System
Display Display
Date/Time Date/Time
System
Memory Memory
Language Language English English English
4 Settings : System Settings : System
System
Auto Shut off Auto Shut off 5 Minutes 5 Minutes
Demonstration Demonstration Off Off
Start-up Video Mode
Reset Reset
File No. File No.
Beep Sound Beep Sound
On On
5
Settings : System Settings : System
System
Auto Shut off Auto Shut off 5 Minutes 5 Minutes
Demonstration Demonstration Off Off
Start-up Previous Mode
Reset Reset
File No. File No.
Beep Sound Beep Sound
On On