Samsung VP-M2100S Owner's Instruction Book page 126

ENGLISH
Troubleshooting
Symptom
Colour balance of picture is not natural
Digital zoom does not work
Files stored in the Memory Card
cannot be deleted
Images on the LCD monitor appear
dark
Rear of the LCD monitor is hot
Play, rewind and fast forwarding do
not work
Memory Card cannot be played
back (Photo mode)
No picture is taken when is fully
pressed
Built-in Light will fire
Cannot Record a video
LCD monitor turns off
126 126
Possible Causes
White balance adjustment is required
The effect(Digital special effect) is applied
Memory Card is protected
File is locked
Ambient is too bright
Ambient temperature is too low
Prolonged use of LCD monitor
The Photo Mode is selected
The Video Mode is selected
Not enough free memory space is
remained
Memory Card is formatted by different
devices
Light is forced to cancel
Light is not available for recording
The 'Photo Mode' is selected
To save power consumption, the LCD
monitor and CAM's power turns off if
there is no button operation for a certain
period of time (depending on operation
mode), which is not a malfunctioning
Measure
Set proper white balance, page 69
Turn off the effect(Digital special effect), page 54
Remove the protection tab of Memory Card (except MMC)
Remove the lock on the file, page 86
Adjust the brightness and angle of LCD
Low temperatures might produce a dark LCD display
This is not a malfunction
Close the LCD monitor to turn if off,
or turn your device off to cool down
Select 'Video Mode' and select 'Play'
Select 'Photo Mode' and select 'View'
Delete files from the Memory Card
Format the Memory Card on the CAM
Select different Flash mode, page 67
Select 'Video Mode'
Operating any button will turn the CAM on
Pressing the button once again will operate its function