Usb Interface For Data Transfer - Samsung VP-M2100S Owner's Instruction Book
Hide thumbs
Also See for VP-M2100S:
- Owner's instruction book (135 pages) ,
- Owner's instruction manual (134 pages) ,
- Owner's instruction book (160 pages)
Table of Contents
Advertisement
Miscellaneous Information : Installing Programs
USB Interface for Data Transfer
Connect the CAM and PC with the provided USB cable. You can record the Video file in PC in real-time.
USB transferring function can be used when DV Driver, Video Codec, DirectX 9.0 programs are already installed in the PC.
(Refer to page 116)
1. Turn on your PC and insert the program CD into the CD-ROM drive.
N
Quit all applications.
2. Connect the provided USB cable to the USB port of the CAM.
3. Move the [W/T] button to select <PC-Cam> and press the [OK] button.
4. Install and run the Ulead VIDEO STUDIO program provided along with the system.
The user of WINDOWS ME or XP can use the USB Interface for data transfer with the Windows Movie
Maker program.
N
(C:/program files/Movie maker/moviemk.exe)
Note
✤
If the PC does not recognise the USB device when the USB cable is connected to USB Port on the front panel of the PC, connect the
USB cable to USB Port on the rear panel of the PC.
ENGLISH
3
USB Mode
Mass Storage
PC-Cam
PictBridge
Back
117
117
Advertisement
Table of Contents
