Setting the CAM : Adjusting Date/Time
Setting Date
The built-in calendar creates the date stamp. You can adjust the date you use.
1. Move [POWER/MODE Selector] down to turn on the CAM.
N
The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to select
and press the [OK] button.
N
The system is automatically converted into the selected mode in two seconds even
when the [OK] button is not pressed.
N
The System Settings menu appears.
3. Move the [W/T] button to select <Date /Time> and press the [√] button.
4. Move the [W/T] button to select <Set Date> and press the [OK] button.
5. Move the [W/T] button to set date and press the [OK] button.
N
Move the [W/T] button to change the setting and press the [√] button to move to the
next setting. Press the [OK] button to confirm selection.
Notes
✤
If you select [œ ] button in the menu, the previous menu appears.
✤
After you finish setting, press the [Record/Stop] button to exit from the menu screen.
✤
Date and Time are recorded information. They are not displayed on the LCD monitor.
✤
You can set Year up to 2037.
System Settings
mode
ENGLISH
2
F / 720i
System Settings
00:00:00 / 00:43:41
STBY
3
System Settings
System Settings
System
Display
Display
Date/Time
System
System
Memory
Memory
Language
Language
English
English
English
4
Settings: Date/Time
Settings: Date/Time
System
Set Time
Set Time
12:00:00
12:00:00
AM
Set Date
2005/01/01
Date Format
Date Format
YY/MM/DD
YY/MM/DD
Time Format
Time Format
12 Hour
12 Hour
Back
Back
5
Settings: Date/Time
Settings: Date/Time
System
2005
/
1
/
1
Press Up/Down to change and
OK to confirm selection
93
93