Setting The Blc (Backlight Compensation) - Samsung VP-M2100S Owner's Instruction Book

ENGLISH
Photo Mode : Setting Various Functions

Setting the BLC (Backlight Compensation)

The Backlight Compensation function helps to make the subject brighter when the subject is
in front of a window or the subject is too dark to distinguish. You can use this function when
using the CAM in the bright backgrounds including snow scenes.
1. Move [POWER/MODE Selector] down to turn on the CAM.
N
The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to select
the [OK] button.
N
The system is automatically converted into the selected mode in two seconds even
when the [OK] button is not pressed.
N
The Photo Capture screen appears.
3. Press the [MENU] button.
4. Move the [W/T] button to select <BLC> and press the [√] button.
5. Move the [W/T] button to select the desired setting and press the [OK] button.
N
Off: Cancel the BLC function.
N
On( ): Set the BLC function.
6. Press the [MENU] button to finish setting.
N
< > is displayed.
N
If you select <Off>, <
Notes
✤
If you select [ œ ] button in the menu, the previous menu appears.
✤
Changes in the set-up made in the Video mode are all retained in the Photo mode.
✤
The BLC is set to Off when the CAM is turned off.
70 70
> is not displayed.
Photo mode and press
2
F / 720i
Photo
00:00:00 / 00:43:41 STBY
Photo Settings Photo Settings
4
System
Size Size 1600×1200 1600×1200
Flash Flash Auto Auto Auto
Focus Focus AF AF
White Balance Auto White Balance Auto
BLC Off
5 Photo Settings Photo Settings
System
Size Size 1600×1200 1600×1200
Flash Flash Auto Auto Auto
Focus Focus AF AF
White Balance Auto White Balance Auto
BLC On
6
1600
Photo Capture
BLC