Setting The Flash - Samsung VP-M2100S Owner's Instruction Book

Photo Mode : Setting Various Functions

Setting the Flash

The Flash only works in Photo mode and allows the user to take photographs in dark places
such as during the night, shaded or dark areas and indoors.
1. Move [POWER/MODE Selector] down to turn on the CAM.
N
The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to select
the [OK] button.
N
The system is automatically converted into the selected mode in two seconds even
when the [OK] button is not pressed.
N
The Photo Capture screen appears.
3. Press the [MENU] button.
4. Move the [W/T] button to select <Flash> and press the [√] button.
5. Move the [W/T] button to select the desired setting and press the
[OK] button.
N
Auto: Set the flash automatically.
N
On( ): Turn on the flash.
N
Off( ): Turn off the flash.
6. Press the [MENU] button to finish setting.
N
The icon of selected function is displayed.
N
If you select <Auto>, no icon is displayed.
Notes
✤
If you select [ œ ] button in the menu, the previous menu appears.
✤
If the battery is low, the flash will not operate automatically.
Photo mode and press
ENGLISH
2
F / 720i
Photo
00:00:00 / 00:43:41 STBY
4
Photo Settings Photo Settings
System
1600×1200 1600×1200
Size Size
Flash Auto
AF AF
Focus Focus
White Balance Auto White Balance Auto
BLC BLC Off Off
5 Photo Settings Photo Settings
System
1600×1200 1600×1200
Size Size
Flash On
Focus Focus AF AF
White Balance Auto White Balance Auto
BLC BLC Off Off
6 Photo Capture 1600
67 67