Setting Start-Up Mode - Samsung VP-M2050S(B) Owner's Instruction Book

ENGLISH
Setting the CAM : Setting the System

Setting Start-up Mode

You can select the starting mode displayed when you turn the CAM on.
1. Move [POWER/MODE Selector] down to turn
on the CAM.
N The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to
select System Settings
[OK] button.
N The system is automatically converted into the
selected mode in two seconds even when the
[OK] button is not pressed.
N The System Settings menu appears.
3. Move the [W/T] button to select <System> and
press the [√] button.
4. Move the [W/T] button to select <Start-up> and
press the [√] button.
5. Move the [W/T] button to set the desired
setting and press the [OK] button.
N Video Mode: The CAM starts up in the Video
Mode.
N Previous Mode: The CAM starts up in the mode
you used last.
Notes
✤ If you select [œ ] button in the menu, the previous
menu appears.
✤ After you finish setting, press the [Record/Stop] button
to exit from the menu screen.
✤ Make sure that the start-up mode is set to the
selected mode when turning on the CAM again.
98 98
2
mode and press the
3
4
5
F / 720i
System Settings
00:00:00 / 00:43:41 STBY
System Settings System Settings
System
Display Display
Date/Time Date/Time
System
Memory Memory
Language Language English English English
Settings : System Settings : System
System
Auto Shut off Auto Shut off 5 Minutes 5 Minutes
Demonstration Demonstration Off Off
Start-up Video Mode
Reset Reset
File No. File No.
Beep Sound Beep Sound On On
Settings : System Settings : System
System
Auto Shut off Auto Shut off 5 Minutes 5 Minutes
Demonstration Demonstration Off Off
Start-up Previous Mode
File No. File No. Reset Reset
Beep Sound Beep Sound
On On
1. [POWER/MODE
N
Video Record
2. [POWER/MODE
System Settings
N
[OK]
N
System Settings
3. [W/T] <System>
[√]
4. [W/T] <Start-up>
[√]
5. [W/T]
[OK]
N Video Mode
N Previous Mode
✤
[œ ]
✤
[Record/Stop]
✤
]
]
[OK]
/