Setting The Beep Sound - Samsung VP-M2100S Owner's Instruction Book

ENGLISH
Setting the CAM : Setting the System

Setting the Beep Sound

You can set the beep sound on/off. When on, a beep will sound every time a button is pressed.
1. Move [POWER/MODE Selector] down to turn on the CAM.
N
The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to select
and press the [OK] button.
N
The system is automatically converted into the selected mode in two seconds even
when the [OK] button is not pressed.
N
The System Settings menu appears.
3. Move the [W/T] button to select <System> and press the [√] button.
4. Move the [W/T] button to select <Beep Sound> and press the [√] button.
5. Move the [W/T] button to select the desired setting and press the [OK] button.
N
On: Turn the beep sound on.
N
Off: Turn the beep sound off.
Notes
✤
If you select [œ ] button in the menu, the previous menu appears.
✤
After you finish setting, press the [Record/Stop] button to exit from the menu screen.
✤
When the Earphones or Audio/Video cable is connected to the CAM, the beep sound function does not operate.
100 100
System Settings mode
2
F / 720i
System Settings
00:00:00 / 00:43:41 STBY
3 System Settings System Settings
System
Display Display
Date/Time Date/Time
System
Memory Memory
Language Language English English English
4
Settings : System Settings : System
System
Auto Shut off Auto Shut off 5 Minutes 5 Minutes
Demonstration Demonstration Off Off
Start-up Start-up Video Mode Video Mode
File No. File No. Reset Reset
Beep Sound On
5 Settings : System Settings : System
System
Auto Shut off Auto Shut off 5 Minutes 5 Minutes
Demonstration Demonstration Off Off
Start-up Start-up Video Mode Video Mode
File No. File No. Reset Reset
Beep Sound Off