Viewing Version Information - Samsung VP-M2100S Owner's Instruction Book

Setting the CAM : Setting the System

Viewing Version Information

You can see the information of the version.
1. Move [POWER/MODE Selector] down to turn on the CAM.
N
The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to select
and press the [OK] button.
N
The system is automatically converted into the selected mode in two seconds even
when the [OK] button is not pressed.
N
The System Settings menu appears.
3. Move the [W/T] button to select <System> and press the [√] button.
4. Move the [W/T] button to select <Version Info> and press the [OK] button.
N
The version of the CAM is displayed.
5. Press the [OK] button to finish viewing version information.
N
If you select <Close> in the screen, the screen disappears.
Notes
✤
If you select [œ ] button in the menu, the previous menu appears.
✤
After you finish viewing Version Information, press the [Record/Stop] button to exit from the menu screen.
System Settings mode
ENGLISH
2
F / 720i
System Settings
00:00:00 / 00:43:41
STBY
3 System Settings System Settings
System
Display Display
Date/Time Date/Time
System
Memory Memory
Language Language English English English
4
Settings : System Settings : System
System
Demonstration Demonstration Off
Off
Start-up Start-up Video Mode Video Mode
File No. File No. Reset Reset
Beep Sound Beep Sound On On
Version Info
5
Settings : System Settings : System
System
Samsung Elec. Co. LTD
PR818S S/W 1.0.1
JUL 25 2005 15:39:06
MICOM 1.00
JUL 21 2005 23:09:41
DSP 0.05
Close : OK
101 101