Installation - HIKVISION TURBO HD H0T PIR Series User Manual

 Keep the camera away from liquid while in use for
non-water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor

IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

Internal synchronization

SMART IR mode

Visible alarm

PIR detection

3-axis adjustment

Alarm linkage with DVR

1.2 Overview
Enclosure
Main Body
Mounting
Base
Figure 1-1 Overview of Type I Camera

2 Installation

Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
 Make sure that all the related equipment is power-off
during the installation.
 Check the specification of the products for the
installation environment.
 Check whether the power supply is matched with
your required output to avoid damage.
Make sure the wall is strong enough to withstand

three times the weight of the camera, and the
mount.
 If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.
 If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
Table 0-1 Mark Description
Description
DC Voltage
PIR
White Light Source
Power Cord
IN DC12V
12 VDC
Video Cable (TVI)