Tripp Lite SmartOnline AGPS8294 Series Owner's Manual page 5

Installation
Tower Mounting
Your UPS can be mounted in an upright tower position with
optional base stands sold separately by Tripp Lite (model:
2-9USTAND). When mounting the UPS on adjustable base stands,
make sure that the control panel is toward the top. The control
panel may be rotated to make it easier to read. Remove the 4
front screws from the front panel and take it off. Pinch the tabs
located on the sides of the LCD panel, and then rotate it. Replace
the front panel and secure it. Front panel setup should be
operated by service personnel only.
WARNING!
All UPS systems are extremely heavy. Use caution when
lifting and mounting. User must properly stabilize the UPS
when lifting and mounting.
UPS Model SUINT1000LCD2U
UPS Dimensions
8.6 x 43.8 x 39.6 cm
(H x W x D)
Operating Altitude: 0 to 3000 m
SUINT1500LCD2U SUINT2200LCD2U
8.6 x 43.8 x 49.6 cm 8.6 x 43.8 x 49.6 cm
5
SUINT3000LCD2U / SU3000LCD2UHV
8.6 x 43.8 x 61.6 cm