Table of Contents
Advertisement
12 www.aeg.com
ments after 90% of the set time.
The appliance uses the residual
heat to continue the cooking
procedure until the time ends.
The residual heat can last from 3
to 20 minutes.
Setting the clock functions:
1.
Set a heating function.
2.
Touch
display shows the necessary clock
function and the related symbol.
3.
Touch
ry time. Touch OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
You can find the recipes for the
automatic programmes specified
for this appliance on our website.
To find the proper Recipe Book
check the PNC number on the
rating plate on the front frame of
the appliance cavity.
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
again and again until the
or
to set the necessa-
4.
Touch a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time , the ap-
pliance deactivates automatically.
• With Duration and End Time , you
must set the heating function and the
temperature first. Then you can set the
clock function.
• You can use Duration and End Time at
the same time if you want to automati-
cally activate and deactivate the appli-
ance at a given time later.
Activating the function:
1.
Activate the appliance.
2.
Select the Assisted Cooking menu.
Press OK to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select Recipe Automatic . Press OK
to confirm.
When you use the Manual func-
tion, the appliance uses the auto-
matic settings. You can change
them as with other functions.
Advertisement
Table of Contents
