Ip Fax Switches - Ricoh D649 Field Service Manual

4. Service Tables

IP Fax Switches

No.
0 Not used
IP Fax Transport
1
0: TCP, 1: UDP
IP Fax single port selection
2
0: OFF, 1: ON (enable)
IP Fax double ports (single data port)
selection
3
0: OFF, 1: ON (enable)
IP Fax Gatekeeper
4
0: OFF, 1: ON (enable)
IP Fax T30 bit signal reverse
5
0: LSB first, 1: MSB first
IP Fax max bit rate setting
6
0: Not affected, 1: Affected
IP Fax received telephone number
confirmation
7
0: No confirmation
1: Confirmation
No.
108
IP Fax Switch 00 (SP No. 1-111-001)
Function
IP Fax Switch 01 (SP No. 1-111-002)
Function
Comments
Do not change this setting.
Selects TCP or UDP protocol for IP-Fax
Selects single data port.
Selects whether IP-Fax uses a double port.
Enables/disables the gatekeeper for IP-Fax.
Reverses the T30 bit signal.
When "0" is selected, the max bit rate does not
affect the value of the DIS/DCS.
When "1" is selected, the max bit rate affects the
value of the DIS/DCS.
When "0" is selected, fax data is received without
checking the telephone number.
When "1" is selected, fax data is received only
when confirming that the telephone number from
the sender matches the registered telephone
number in this machine. If this confirmation fails,
the line is disconnected.
Comments