Ricoh D649 Field Service Manual page 91

Paper size selection priority
0 0: Width
1: Length
Paper size selected for printing A4 width
fax data
1
0: 8.5" x 11" size
1: A4 size
Page separation
2 0: Enabled
1: Disabled
Printing the sample image on reports
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
5-6 Not used
Equalizing the reduction ratio among
separated pages
(Page Separation)
7
0: Enabled
1: Disabled
Setting
The upper half only
50% reduction (sub-scan
only)
Same size
Not used
Printer Switch 0F (SP No. 1-103-016)
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction is
selected first.
This switch determines which paper size is
selected for printing A4 width fax data, when
the machine has both A4 and 8.5" x 11" size
paper.
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a cassette,
the machine automatically prints the fax
message.
"Same size" means the sample image is printed
at 100%, even if page separation occurs.
User Parameter Switch 19 (13H) bit 4 must be
set to "0" to enable this switch.
Refer to Detailed Section Descriptions for more
on this feature.
Do not change the settings.
0: When page separation has taken place, all
the pages are reduced with the same reduction
ratio.
1: Only the last page is reduced to fit the
selected paper size when page separation has
taken place. Other pages are printed without
reduction.
Bit Switches
89