Ricoh D649 Field Service Manual page 96

4. Service Tables
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
No
0-7 IP-Fax dial interval setting
No
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
No
0-3 Not used
Printout of the message when acting
as a Transfer Station
4
0: Disabled, 1: Enabled
5-7 Not used
Communication Switch 0C - Not used (do not change the settings)
94
Communication Switch 09 (SP No. 1-104-010)
Function
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by following
formula.
[Interval time = specified value with this switch x 0.2
msec]
Communication Switch 0A (SP No. 1-104-011)
Function
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
Do not change the settings.
Communication Switch 0B (SP No. 1-104-012)
Function
Do not change the settings.
When the machine is acting as a Transfer Station, this
bit determines whether the machine prints the fax
message coming in from the Requesting Terminal.
Do not change the settings.
Communication Switch 0D (SP No. 1-104-014)
Comments
Comments
Comments