Ricoh D649 Field Service Manual page 76

4. Service Tables
No
Communication after the Journal
data storage area has become full
0
0: Impossible
1: Possible
Action when the SAF memory has
become full during scanning
1
0: The current page is erased.
1: The entire file is erased.
RTI/CSI display priority
2
0: RTI 1: CSI
File No. printing
3 0: Enabled
1: Disabled
74
System Switch 1E (SP No. 1-101-031)
Function
0: When this switch is on and the journal history
becomes full, the next report prints. If the journal
history is not deleted, the next transmission cannot be
received. This prevents overwriting communication
records before the machine can print them.
1: If the buffer memory of the communication records
for the Journal is full, fax communications are still
possible. But the machine will overwrite the oldest
communication records.
0: If the SAF memory becomes full during scanning at
the memory transmission, the successfully scanned
pages are transmitted.
1: If the SAF memory becomes full during scanning at
the memory transmission, the file is erased and no
pages are transmitted.
This bit determines which identifier, RTI or CSI, is
displayed on the LCD while the machine is
communicating in G3 non-standard mode.
1: File numbers are not printed on any reports.
NOTE: The file numbers may not be printed in the
sequential order. If a customer does not like this
numbering, select "0".
Comments
• This setting is effective only when Automatic
Journal printout is enabled but the machine
cannot print the report (e.g., no paper).
• This setting is effective only when Automatic
Journal printout is enabled but the machine
cannot print the report (e.g., no paper).