Gpio - Advantech TREK-550-A00E Manual

Figure 6.10
1. Off Event Delay: You may set how many seconds you want system auto shut
down after ignition off.
2. On Delay: You may set how many seconds you want the system to auto power
on.
3. Low Delay: When the battery voltage is below certain value you set, it will
automatically shut down to prevent the system will consume the battery.
6.3.4 TREK-550 power consumption
OS: Windows Embedded Standard
Burn-in test V6.0
w/o TREK-303H
w/ TREK-303H
*Doesn't support S1, S3, S4
6.4 GPIO Test
1. Execute I/O Test, connect GPIO loopback, click Pin0 Set, the end which Read
the signal, the bulb will be light up, like wise to Pin1~Pin3. Next pick Digital output
to execute the same procedure. See figure 6.
Figure 6.15
55
www.advantech.com
Idle Mode 100% Burn-in Test Mode
12V / 1.04A 12V / 1.20A
12V / 1.51A 12V / 1.94A
Off mode (S5)
12V / 1.75mA