Camera Connection - KERN OBE-1 User Instructions

8.3 Camera connection

OBE 104, OBE 110, OBE 114
Due to the trinocular tube, which is a standard fitting for the models OBE 110 and
OBE 114, it is possible to connect microscope cameras to the device, in order to
digitally record images or sequences of images of an object being observed.
After the plastic cover has been removed from the camera adapter connector on the
top of the microscope head, then a suitable adapter must be fitted.
In general there are two C-mount adapters available for this (1x and 0.5x
magnification, see Chapter 3 Features). After fitting one of these adapters it can be
fixed with the fixing screw. A camera which has a C-mount thread is then screwed on
top of the adapter.
We recommend that you first adjust the field of view using the eyepieces on the
device for the existing requirements, and then carry out the observation using the
microscope camera (i.e. using the PC screen which is connected).
The tube has a light distribution that guarantees the providing of light for the
eyepieces and the camera connection at the same time. This means that it is
possible to simultaneously observe by the eyepieces and PC screen.
For C-mount adapters, which have their own integrated magnification, the image
which is shown on the camera connected to the device can often have a different
level of focus compared with the image on the eyepiece.
In order to be able to bring both images into focus, the focus can be adjusted by
those adapters.
OBE-1-BA-e-1611 22