Table of Contents
Advertisement
3.6
Installation parameters
3.6.1
Accessing installation parameters
Setup
Setup
Gives access to setting installation and user parameters and to
the test mode.
The parameter setup is divided into three parts:
1- USER PARAMETERS: Parameters that may be modified by
User
the user: change the language, set the chronometer and set
the screen color.
Install
2- INSTALLER PARAMETERS: Parameters that must be set
when installing the DRO for the first time, when replacing an
encoder or when doing a repair. They are parameters related
to the machine, feedback and to the DRO itself.
Test
3- TEST MODE: To check the various status of different elements of the DRO, such as screen, keyboard,
etc.
For the installer only. Accessing the test mode requires a password:
Password:
3.6.2
User parameters:
Setup
Setup
Parameters that may be modified by the user: change the language, set the chronometer and set the
screen color.
3.6.2.1
Language
Use the cursor keys to select the language.
Press Enter.
Home search
231202
User
Setup
Setup
User
Test
Language
Color
DRO
(type, axes, alarms)
40i P - Installation/Operation - DRO installation - (22/32)
Installer
Password
231202
Feedback
Compensation
(encoders)
(linear, multi-point)
Advertisement
Table of Contents
