OHP 7500 User Manual
OHP 7500 User Manual
Playback Operation
Playback
Playing Audio Stored in On-Board Memory or on SD Card
By default, the unit is always in "playback" mode. When unit is playing, the LCD
will display a running time and the
be stopped by pressing the PLAY/STOP button.
Moving Between Tracks
While in playback mode, you can move between tracks by pressing the
buttons on the unit.
Fast Scanning Through Tracks
While in playback mode, you can fast forward or rewind through a track by
holding the
displayed in the upper left of the LCD window.
Playback Modes
The player is set to the Play mode as a default. You may stop playback by pressing
PLAY/STOP. Using the
"repeat" icon in the LCD will show which mode you are in:
Selecting a Single Track for Playback
Press the MENU button (LCD will display track names).
1
Use the up/down arrows to navigate to the desired track.
2
Press the MENU button to select the track (a
3
Press the
4
Saving Your Playback Settings
The unit can save volume level, repeat function, and track selection settings. To
save settings follow these steps:
Press PLAY/STOP button once to stop playback.
1
2
Press and hold PLAY/STOP again until the LCD shows "SETTING SAVED."
3
Press PLAY/STOP again to resume playback.
Playback After Power Loss
If power to the unit is lost, the unit will automatically resume playback as soon as
power is reapplied. If saved, volume level, repeat function and track selection
settings are recalled as soon as power is reapplied and playback begins.
or
button. When in Fast Scan Mode
button, you can select from one of three modes. The
Repeat all tracks in order
S
Repeat all tracks in a random order
1
Repeat the current track only
mod
button to return to playback -- the display will show
icon will be shown on the LCD. Playback can
will appear next to the selected track).
9
or
will be
1