Printer Settings - Canon LBP251 User Manual

Printer Settings

*
Asterisks ( )
● Settings marked with "
● Settings marked with "
Priority of settings
● If a print setting is specified both from the printer driver and the operation panel of the machine, the
specification from the printer driver overrides that from the operation panel. The specification from the
operation panel becomes effective in some specific cases, such as when you are printing from UNIX or other
operating system on which printer drivers for the machine are not available.
Availability of settings
● All the printer settings described in this section, except for <Paper Size Override> (
Override(P. 315) ), are only available for PS/PCL printing. Specifying these settings is unnecessary, for
example, when you print using the UFR II printer driver.
Action When Free Paper Size Mismatch(P. 313)
Copies(P. 314)
2-Sided Printing(P. 315)
Default Paper(P. 315)
Paper Size Override(P. 315)
Print Quality(P. 315)
Layout(P. 317)
Auto Error Skip(P. 319)
Timeout(P. 320)
Personality(P. 320)
UFR II(P. 320)
PCL(P. 321)
PS(P. 326)
XPS(P. 328)
Imaging(P. 331)
Action When Free Paper Size Mismatch
In the case where the paper size for a paper source is set to <Free Size> under <Free Size>, specify the operation to be
performed by the machine when the size of the loaded paper and the paper size setting in the printer driver are rather
different from each other.
Setting Menu List
All the settings about the printer are listed with short descriptions. Default settings
are marked with a dagger ( ).
*1
" are only available when the optional paper feeder (drawer 2) is attached.
*2
" are only available for the LBP252dw.
313
0W20-05E
Paper Size