Glass Specifications; Electrical Rating (On High); Btu & Efficiency Specifications; Stove Dimensions - Pelpro PP130 Owner's Manual

Listings and Certifications

Glass Specifications

This Stove is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please contact PelPro for replacement glass.

Electrical Rating (On High)

PP130-B: 120 VAC, 60 Hz, Start 2.6 Amps,
Run 2.3 Amps
BTU & Efficiency Specifications
Emissions Report No. 0135PS041E
EPA Certificatin # 128-18
EPA Certified 0.53 grams / hr
*LHV Tested Efficiency 87.5%
**HHV Tested
Efficiency
***BTU Output 9,605 - 40,667 / hr
****BTU Input 11,676 - 49,207 / hr
*****Heating Capacity
Vent Size 3" or 4" L or PL
Hopper Capacity 130 lbs (Approximate)
Fuel Premium Wood pellets
Shipping Weight 265 lbs
*Weighted average LHV efficiency using data collected during EPA emissions test.
**Weighted average HHV efficiency using data collected during EPA emissions test.
***Maximum BTU output based on HHV efficiency and the high burn section of the EPA emissions test.
****Maximum BTU input based on the high burn section of the EPA emissions test.
*****Heating capacity depencs on climate zone, structure layout, insulation, windows, etc.

Stove dimensions

Stove Dimensions
24-1/2 [622]
4-1/2 2-1/2
[114] [64]
pelprostoves.com
81.9%
1,225 to 2,500 sq. ft.
depending on climate zone
24-1/2 [622]
PelPro Pellet Stove • 7104-171C • 10/3/18
This manual describes the installation
and operation of the Brand PelPro,
Model PP130-B wood Stove.
This Stove meets the 2020 U.S.
Environmental Protection Agency's
crib wood emission limits for wood
Stoves sold after May 15, 2020. Under
specific test conditions this Stove has
been shown to deliver heat at rates
ranging from 9,605 to 40,637 Btu/hr.
22-3/4 [578]
36-1/2 [902]
8-1/4 [210]
AIR INLET
9-1/2 [241]
FLUE
37