Troubleshooting; Power Related - Pelpro PP130 Owner's Manual

Troubleshooting

Troubleshooting your Stove
Visit pelprostoves.com or scan the code:

Power Related

In the event of a power outage:

• If using a generator, PelPro recommends a steady state
generator for best Stove performance.
• This Stove needs 110v to run properly. This Stove has
not been tested for use with a third party battery backup.
Stove plugged in but no response

• Unplug your Stove
• Check your home's circuit breaker
• Reset snap disc (located between drop tube and hopper
(Zone 2)
A
• Visually inspect wires, blowers and power cord for
breaks or wear to find cause of possible short circuit
(Zone 2)
Component (i.e. blower) fails to start or fails to turn off

• Unplug your Stove
• Check all connections and power plugs are secure
• Visually inspect wires, blowers and power cord to find
cause of possible short circuit
pelprostoves.com PelPro Pellet Stove • 7104-171C • 10/3/18
Pro Tip
Check passages to assure they
are clear of ash and obstructions.
Poor airflow leads to poor
performance of your Stove.
A
Zone Zone
1 1
Zone Zone
2 2
Zone Zone
3 3
29