Pelpro PP130 Owner's Manual page 32

Troubleshooting
Symptom
Igniter does not
turn off
Feed motor does
not shut off
Stove fails to shut
off.
Large, lazy flame,
orange color.
Black ash on
glass.
Excessive fuel
spilling over the
fire pot into the
ash wells and/or
excessive flame
32
Possible Cause
Igniter short circuit. The fuse will be blown and
upon replacement of the fuse, the igniter will
remain on when Stove has power.
Feed motor short circuit. The fuse will be blown
and upon replacement of the fuse, the feed motor
will remain on when Stove has power.
Stove running in maximum or minimum
Dirty Stove.
Poor fuel quality, high ash content.
Incorrect air-fuel adjustment
Excessive feeding/Feed Motor locked on
Excessive feeding/Feed Motor locked on
PelPro Pellet Stove • 7104-171C • 10/3/18
Corrective Action
Inspect wires, blowers, and power cord to find
cause of short circuit. Replace board and failed
component.
Open hopper to stop the feed motor.
Inspect wires feed motor, control board, and power
cord to find source of short circuit. Replace control
board and failed component.
Turn dial control to Off position. See Also, "Feed
Motor Does Not Shut Off".
The Stove should go into a shutdown.
Clean Stove, including fire pot and venting system.
Clean exhaust path. Try a different brand of pel-
lets.
Turn fuel adjustment trim dial to COUNTER-
CLOCKWISE to increase combustion air speed;
see trim pot adjustment section.
Follow corrective action for feed motor does not
turn off symptom.
Follow corrective action for feed motor does not
turn off.
pelprostoves.com