Table of Contents
Advertisement
turning the rotary selector. Press the
menu.
Cancelling the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Switch to end time by turning the
rotary selector, press the
X
using the rotary selector until the display goes out. Press the
button to close the menu.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
The "Set clock" heading appears in the display following a
power cut.
Press the
button and turn the rotary selector to set the
X
1.
current time.
Memory
Memory gives you the option to store your own settings and
call them up again at the press of a button. There are six
memory locations available. The memory function is useful for
recipes which you prepare particularly frequently.
Storing settings in the memory
You cannot store self-cleaning.
Set the required operating mode. Do not start.
1.
Press and release the
f
2.
select one of the six memory locations.
Press and hold the
f
button until "Memory saved" is
3.
displayed.
The setting is saved and can be started at any time.
Reallocating a memory location
Make the settings, select the memory location and save the
new settings using the
f
overwritten.
Sabbath mode
When this setting is used, the temperature of the oven remains
at between 85 °C and 140 °C with Top/bottom heating. You
can set a time between 24 and 73 hours.
You can keep dishes in the cooking compartment hot for this
time without having to switch the oven on or off.
Starting Sabbath mode
Prerequisite: "Sabbath mode, yes" is activated in the basic
settings. See the Basic settings section.
Press the
button.
!
1.
3D hot air and 160 °C are suggested in the display.
Turn the rotary selector anti-clockwise to Sabbath mode.
2.
Use the
button to switch to the temperature and set the
X
3.
desired temperature using the rotary selector.
Press the
button to open the Time-setting options menu
0
4.
and use the rotary selector to switch to Cooking time.
27:00 hours are suggested.
14
0
button to close the
button and shift the end time back
button and use the rotary selector to
button. The old settings are
Press the
0
button.
2.
The time is applied.
Changing the clock
0
Example: changing from summer to winter time.
Press the
0
button.
1.
0
The time-setting options menu appears.
Switch to the clock by turning the rotary selector.
2.
Press the
button and turn the rotary selector to change
X
3.
the time.
Press the
button.
0
4.
The time-setting options menu closes. The time is changed.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can hide the clock. For more information,
refer to the Basic settings section.
Starting the memory
You can start the saved settings at any time.
Press and release the
1.
select the memory location.
The stored settings are displayed. If "Memory location empty"
appears, this means that there are no settings stored as yet
in this memory location.
Press the
n
button.
2.
The memory function starts.
Changing the memory location
Once operation has started, you can no longer change the
memory location.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
Press the
button.
X
5.
Turn the rotary selector to set the required cooking time.
6.
Press the
n
button.
7.
The Sabbath mode starts. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
The oven stops heating.
Setting a later end time
It is not possible to set a later end time.
Cancelling Sabbath mode
Press and hold the
You can make new settings.
button and use the rotary selector to
f
button until "Select function" appears.
n
Advertisement
Table of Contents
