Setting The Cooking Time; Setting A Later End Time - Bosch HBC86P7 3 Series Instruction Manual

Setting the cooking time

If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: top/bottom heating setting, 180 °C,
cooking time of 45 minutes
Press the button.
0
1.
The time-setting options menu appears.
7LPHVHWWLQJ RSWLRQV
7LPHU
  PLQ VHF
([LW ZLWK
Switch to the cooking time by turning the rotary selector.
2.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
  PLQ VHF
([LW ZLWK
Press the button to change line.
X
3.
Turn the rotary selector to set the cooking time.
4.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
  PLQ VHF
([LW ZLWK
Press the button.
0
5.
The time-setting options menu closes.
If the operation has not yet started, press the
6.
can see the cooking time counting down in the status bar.
7LPH VHWWLQJV
7RSERWWRP KHDWLQJ
 ƒ&
    
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the button.
0
Cancelling the cooking time
Press the button to open the menu. Use the rotary selector
0
to switch to the cooking time, press the
cooking time to 00:00 by turning the rotary selector. Press
the button to close the menu.
0
Changing the cooking time
Press the button to open the menu. Use the rotary selector
0
to switch to the cooking time, press the
the cooking time by turning the rotary selector. Press the
button to close the menu.
n button. You
button and set the
X
button and change
X
0

Setting a later end time

Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
all types of heating and all dishes from the recommended
■
settings
a variety of programmes
■
and for self-cleaning
■
Example: you put the dish in the cooking compartment at 9.30 .
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Setting a later end time
Prerequisite: The selected operation has not already begun and
a cooking time has been set. The
is open.
Switch to "End" by turning the rotary selector. The end time of
1.
the operation is displayed in the second line.
7LPHVHWWLQJ RSWLRQV
(QG
 
([LW ZLWK
Press the X button.
2.
Set a later end time by turning the rotary selector.
3.
7LPHVHWWLQJ RSWLRQV
(QG
 
([LW ZLWK
Press the 0 button to close the time-setting options menu.
4.
Confirm by pressing the
5.
7LPHVHWWLQJ RSWLRQV
7RSERWWRP KHDWLQJ
 ƒ&
 
The setting is adopted. The oven is in
time is displayed in the status bar. When cooking starts, the
cooking time is shown counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the 0 button.
Correcting the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Use the rotary selector to switch to
end time, press the X button and adjust the end time by
time-setting options menu
0
button.
n
0 ... standby. The end
0
13