Control Panel; Buttons; Rotary Selector; Display - Bosch HBC86P7 3 Series Instruction Manual

Control panel

Here, you will see an overview of the control panel. Depending
on the appliance model, there may be differences in the
particular details.
%XWWRQ IRU D VHULHV RI RSHUDWLRQV
0LFURZDYH
SRZHU VHWWLQJV

Buttons

The sensors are located under the individual buttons. They
must not be pressed too firmly. Only touch the corresponding
symbol.
Exception: the button for the series of operations and the
buttons for the microwave power settings are normal push
buttons.
Buttons
Symbol/button Button function
Selects a series of operations
2
90 Selects 90 watt microwave power
180 Selects 180 watt microwave power
360 Selects 360 watt microwave power
600 Selects 600 watt microwave power
1000 Selects 1000 watt microwave power
Selects the type of heating
!
Selects automatic programmes
`
Selects automatic self-cleaning
q
Moves one line down in the display
X
Moves one line up in the display
Y
Selects the memory
f
Switches on rapid heating
c
Opens and closes the time-setting options
0
menu
Switches the oven light on and off
B
Press briefly = calls up information Press
°
and hold = opens and closes the basic
settings menu
Activates/deactivates the childproof lock
D
Switches the oven on and off
%
Press briefly = starts/pauses operation
n
Press and hold = cancels operation

Rotary selector

The rotary selector is used to alter the default values and set
values.
The rotary selector is retractable. Press on the rotary selector to
pop it in or out.
%XWWRQV
'LVSOD\ 5RWDU\ VHOHFWRU

Display

The display is split into different sections:
Heading, only appears prior to starting
■
Settings area
■
Status bar, appears after starting
■
Heading
The function selected is shown in the top line, e.g. types of
heating, programmes, time-setting options, etc..To the right of
this, arrows indicate the direction in which you can navigate
using the
starting.
Settings area
Suggested values appear in the settings range, which you can
change. You can change from one line to the next using the
and
Y
line you are currently in. You can use the rotary selector to
change the value in the brackets.
Status bar
The status bar is at the bottom of the display. It appears when
the oven is started and shows the current time, any time-setting
options that are running or the childproof lock setting. Before
starting the appliance, you can access short texts that provide
directions on how to make the relevant settings, if necessary.

Temperature indicator

The temperature indicator bars show the heating phases or
residual heat in the cooking compartment.
Heating phases
After the oven is switched on, five bars appear below the
specified temperature. This temperature has been reached
when the last bar is full.
If you have selected a grill setting, self-cleaning or the
microwave, the bars do not appear.
0LFURZDYH
SRZHU VHWWLQJV
X and Y buttons. The heading disappears after
navigation buttons. Brackets are displayed around the
7LPH VHWWLQJV
7RSERWWRP KHDWLQJ
 ƒ&
   
X
5