Kyocera ECOSYS M5526cdw Operation Manual page 290

Setup and Registration (System Menu) > System Menu
Item
ThinPrint
Protocol Setting
Port Number
Thin Print over SSL
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
Enhanced WSD
Protocol Setting
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
Enhanced WSD over SSL
Protocol Setting
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
-
Select whether to use ThinPrint.
Value: Off, On
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Set the ThinPrint default Port Number. The default port number is 4000.
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
To use the Thin Print over SSL protocol, set [Thin Print Over SSL] to [On].
Value: Off, On
NOTE
• This function is displayed when [Protocol Setting] is set to [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
-
Set whether to use our proprietary web services.
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN, and Network FAX driver.
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
-
Set whether to use our proprietary web services over SSL.
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN and Network FAX drivers.
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Description
*1, *3
*1
8-34
*1, *3
*1, *3