Kyocera ECOSYS M5526cdw Operation Manual page 288

Setup and Registration (System Menu) > System Menu
Item
SNMPv3
Protocol Setting
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
HTTP
Protocol Setting
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
HTTPS
Protocol Setting
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
IPP
Protocol Setting
Port Number
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
-
Select whether to communicate using SNMPv3.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
-
Select whether to communicate using HTTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
-
Select whether to communicate using HTTPS.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
-
Selects whether to receive documents using IPP. To use the IPP protocol, select [Not Secure
(IPP&IPPS)] on IPP Security under Security Settings from the Command Center RX.
Value: Off, On
Set the IPP default Port Number. The default port number is 631.
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Description
*1
*1
*1, *3
8-32
*1