Advertisement
THANK YOU
Thank you for purchasing the WMRK/ERK Series Top. Please read these instructions thoroughly
before installing this product.
TOOLS REQUIRED: #2 Phillips Driver
INSTALLATION
1) Install four (4) grommet nuts into the front and rear holes of enclosure as shown.
2) Position top as required. Thread all screws evenly then tighten screws securely - DO NOT OVERTIGHTEN.
Instruction Sheet
WMRK/ERK SERIES
Top Installation
(ERK-10FT Shown)
FRONT
TOP
SCREW
GROMMET NUT
ENCLOSURE
I-00015
Rev G
Advertisement
Table of Contents
Related Manuals for Middle Atlantic Products WMRK Series
Summary of Contents for Middle Atlantic Products WMRK Series
- Page 1 Instruction Sheet WMRK/ERK SERIES Top Installation THANK YOU Thank you for purchasing the WMRK/ERK Series Top. Please read these instructions thoroughly before installing this product. TOOLS REQUIRED: #2 Phillips Driver INSTALLATION 1) Install four (4) grommet nuts into the front and rear holes of enclosure as shown. 2) Position top as required.
- Page 2 (ERK-10FT Shown) WARRANTY Middle Atlantic Products, Inc. (the "Company") warrants the WMRK/ERK Series Top to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product. The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after inspection thereof at the Company's factory.
Need help?
Do you have a question about the WMRK Series and is the answer not in the manual?
Questions and answers