Example Connections - Yamaha powered mixer Owner's Manual

18
Installation/Connection

Example connections

Effects processor
88
Synthesizer,
Drum machine,
Guitar processor
Hi-Z Hi-Z Hi-Z Hi-Z
Low-Z Low-Z Low-Z Low-Z
Microphone
The figure above shows appropriate jacks to
connect each instrument.
* The Low-Z and Hi-Z input of each channel can-
not be used simultaneously.
*1. Although this example shows an external effects
processor and footswitch, which is used to turn
on and off the built-in digital effects processor,
connected to the EMX66M, in practice, only one
effects processor, internal or external, will be
used at a time, so the footswitch is not required
when using external effects.
EMX66M—Owner's Manual
CD player
LINE Super Hi-Z
INPUT TO MAIN
1 1
EFFECT OUT
2TR
IN
2 2
1
MIC
MIC
FOOT SW AUX IN
2
Electric-acoustic
guitar
Electric bass
Recorder (Cassette, DAT, MD)
OUT PUT
ON / OFF
EEEngine
REC
OUT
1
MAIN
MONITOR
2
SEE REAR PANEL CAUTION
*1
Footswitch
(YAMAHA FC5)
Main Speakers
Power AMP
Monitors Speakers
Normally, connect speakers to the
jacks on the rear panel. If more
speaker outputs are needed, use the
MAIN jack and the MONITOR jack for
additional outputs.