Introduction; Device List; Connections - Yamaha Tio1608-D Setup Manual

Introduction

The systems explained in this guide use the "Quick Config" function found
in the TF Series. This function can facilitate the system setup by
automatically patching the Dante network between the TF series and
Tio1608-D.
To build a more flexible system, use the Dante controller instead of the
Quick Config function, and do the patching manually. For details on Dante
Controller, refer to the Dante Controller User Guide.
http://www.yamahaproaudio.com/global/en/downloads/manuals/?lang=e
n&q=DANTE-MY16-AUD

Device List

1. Yamaha digital mixing console: TF Series (TF5/TF3/TF1)
2. Yamaha I/O rack: Tio1608-D
3. Yamaha Dante I/O card: NY64-D
4. CAT5e or CAT6 network cable
5. (as necessary) Dante Controller software (can be downloaded
for free from the Audinate website) and a compatible computer

Connections

In order to connect the TF Series and the Tio1608-D, it is necessary to
install the Dante I/O card (NY64-D) on the TF Series. Connect the NY64-D
(installed onto the TF Series) and the Tio1608-D in a daisy chain, using
the CAT5e or CAT6 network cables. Up to three Tio1608-D racks can be
connected to one TF Series console. There is no need to make the ID
order of the Tio1608-D match the order of the physical connection.
Stagebox system using the TF5 and three Tio1608-D racks
3
TF Series & Tio1608-D
www.yamahaproaudio.com