Yamaha Electone EL-57 Owner's Manual page 116

Every User rhythm consists of two
measures. You can program the
rhythm sequence a measure at a time.
If you want to program two-measure
User rhythms, you are required to
enter it twice, for the first measure and
the second measure.
When entered, the first measure is
displayed as positive box
second measure is displayed as
negative box
The rhythm patterns can be divided
into four groups: Normal such as
8
and , Intro, Fill In and Ending.
When changing the type, for example,
from Normal to Fill In and Fill In to
Normal while programming a rhythm
sequence, the first measure of the
newly selected type will always be
selected and follow. However, when
the same type continues even though
you change the rhythm, for example,
from to
measure may succeed the sequence.
That means some of the User rhythms
inserted in a rhythm sequence may
begin from its second measure.
To keep this from happening and
begin the newly selected rhythm from
the first measure, insert a different
type, Fill In, before using the new
rhythm pattern.
NOTE:
A maximum of 120 patterns can be
entered to a single sequence.
112
2) Programming a Sequence
and the
.
, the second
Select the type of rhythm you wish to enter, Preset or User.
Select the desired rhythm by pressing the appropriate button in
the Rhythm section, then select SET in the display to enter the
pattern. (Refer to the Rhythm Pattern Number Table [on the
next page] for a list of the rhythms and their number
assignments.)
When PRESET is selected in step #1 above, the Rhythm buttons
are used to select the Preset rhythm names printed at the top.
When USER is selected, however, these buttons function
according to the User numbers and letters printed at the bottom.
Select the User pattern by pressing one of the numbered buttons
(1-8), then a lettered button (A, B, C, or D) or FILL (for User Fill
In).
MARCH WALTZ
SEQ. SEQ.
1 2
USER 1 USER 2
TANGO LATIN 1
SEQ. SEQ.
3 4
USER 5 USER 6
RHYTHM
SWING BOUNCE SLOW 1
ROCK
USER 3 USER 4 A B
LATIN 2 8 BEAT 16 BEAT 2
USER 7 USER 8 C D
MAX
MIN