Yamaha Electone EL-57 Owner's Manual page 42

3
VOICE EFFECT
DISPLAY
FOOT REGIST
SW.
VOICE
EDIT PATTERN SEQUENCE
DISPLAY SELECT
NOTE:
The EL-57's various effects include
Glide effect. See page 119 for the
information on Glide.
38
2) Setting the Tremolo effect
Tremolo setting made here are global; in other words , they are applied
the same to all voices for which Tremolo has been turned on (set to
standby).
A. B. C.
SET M. O. C.
EXP.
SHIFT PITCH/MIDI
RHYTHM
PROGRAM
TREMOLO
(FAST)
3) Realtime control of Tremolo effect
Once the Tremolo effect has been turned on and set, you can control the
effect in real time from the panel or from the left footswitch.
To turn on the Tremolo effect and call up the Tremolo Control page:
Press the TREMOLO (FAST) button in the DISPLAY SELECT
section.
The Tremolo Control page will be displayed.
The lamp of the button lights up to indicate that Tremolo is on.
Press the button again to turn Tremolo off and Chorus on (the
LED turns off).
TREMOLO CONTROL Page
1 TREM. SPEED (Tremolo Speed)
Determines the speed of the Tremolo (rapid rotation) effect.
Range: 0-100
2 CHOR. MODE (Chorus Mode)
Determines the effect applied when Tremolo is switched off (the
LED turns off): a slow chorus effect (SLOW) or STOP. Use the
SLOW setting when you want to have a constant rotating
speaker sound. When you turn off the TREMOLO button while
STOP is selected, you can obtain the effect that the rotating
speaker is stopped.
Panel Control
Simply press the TREMOLO (FAST) button in the DISPLAY
SELECT section to turn the Tremolo effects on and off while
you're playing.
This button functions just like the fast/slow switch on an actual
rotating speaker cabinet. When Tremolo is on, the rotation
effect is fast; when off (Chorus), it is slow. The speed change is
gradual, effectively simulating the slowing down and speeding
up of a rotating speaker.
Footswitch Control
You can also use the left footswitche to control the Tremolo
effect in the same way, if the footswitch has been properly
assigned. (See the section Footswitch Assign on page 118 for
details.)
1 2