Yamaha Electone EL-57 Owner's Manual page 35

Voice Condition [PAGE 2]
Press Page buttons to select PAGE 2.
1 -1 1 -2 1 -3 1
1
The Pedal voice section has PAGE 1 settings only (no PAGE 2). No
Vibrato setting is available with the Pedal voice section. The Touch
Vibrato function is only available with the Lead voice section.
1) 1 VIBRATO
1
PRESET/USER
-1
Selects Preset, which calls up the original (factory) vibrato
settings for the voice, or User, which lets you adjust the vibrato
settings yourself.
1
DELAY
-2
Determines the amount of time that elapses between the playing
of a key and the start of the vibrato effect (see diagram). Higher
settings increase the delay of the vibrato onset.
1
DEPTH
-3
Determines the intensity of the vibrato effect (see diagram).
Higher settings result in a more pronounced vibrato.
1
SPEED
-4
Determines the speed of the vibrato effect (see diagram).
2) 2 TOUCH VIB. (TOUCH VIBRATO)
On/Off switch for the Touch Vibrato function.
Touch Vibrato lets you apply vibrato to individual notes as you play
them. While playing a key, press down harder on it to give the note
vibrato. The harder you press the key down, the greater the vibrato will
be.
-4 2
PAGE
Upper/Lower
NOTE:
The User vibrato may not be
effective for some voices such as
Synth. Chime.
NOTE:
The Delay, Depth and Speed settings
are not displayed and cannot be
adjusted unless USER has been
selected in this setting.
Vibrato Controls
Delay
NOTE:
Only the Depth parameter is available
for the User setting of the Upper/
Lower Keyboard Voice sections.
NOTE:
When you set the DEPTH (avobe) to
0, the Touch Vibrato function will be
inactive.
3
Speed
Depth
31