Basic Operation - Rail King Ready-To-Run SD70ACe Diesel Set Operation Manual

Basic Operation

After making sure everything is properly assembled, aim the Remote at the Receiver
and press the SU/SD Button on the Remote. (** NOTE - Because this is an infrared
line-of-sight remote, you must aim the remote at the receiver in order to send signals to
the track. **). Once pressed the Engine start up sound will begin as well as the lights
and smoke unit will turn on. Now press the + end of the Remote's Throttle Control
and the train will start to move forward. Each time you press the + end of the Throttle
Control the train will move faster and faster. Please see the Operating Buttons Using
the Handheld Remote for more information on using the Remote to operate the train.
+
Throttle Up
BELL
Rings Bell
SND
Plays accent sounds
SU/SD
Start-Up/Shut-Down
Activates or Deactivates
sound,smoke,lights
PFA
Activates Passenger/Freight
Sounds
Note: You cannot use this Remote and Receiver with pre-1997 versions of Proto-Sound™
or with Proto-One™, Proto-Plus™, Proto-Deluxe II™ engines, whatever the date.
RailKing® SD70ACe Diesel Ready-To-Run Set w/Proto-Sound® 3.0
Fires front & rear couplers
™
8
WHISTLE/HORN
Blows Whistle/Horn
CPLR
Volume
Direction
Throttle Down
VOL
DIR
-