Ditch Lights; Reset To Factory Default; Automatic Sound Effects - Rail King Ready-To-Run SD70ACe Diesel Set Operation Manual

Ditch Lights (On/Off)
By Default your Ditch Lights are set to ON. That means they are ON as soon as the
engine starts moving in forward. When you sound the horn they will alternately flash and
will continue to flash for 5 seconds after the horn button has been released. When you
set the Ditch Lights OFF they will stay off regardless of movement or horn sounds. To
toggle the Ditch Lights, perform the following sequence on your AC transformer below:
Place
Horn
Engine in
Neutral
NOTE – The Ditch Lights follow Rule 17 lighting. That means when your engine is
stopped the ditch lights will go off. Once you start moving again in forward (when the
headlight goes from dim to bright) they will come back ON, provided you have them
set to ON.

Reset to Factory Default

To override the settings you currently have assigned to the engine and reset it to its
factory defaults, while in Neutral tap the Horn button quickly once, followed by five
quick taps of the Bell button, allowing approximately ½ second to lapse between each
quick button press. Two horn blasts will indicate that the engine has made the change.
Place
Horn
Engine in
Neutral

Automatic Sound Effects

Certain Proto-Sound 3.0 sound effects automatically play in programmed conventional
mode conditions:
• Squealing Brakes play any time the engine's speed decreases rapidly.
• Cab Chatter plays at random intervals when the engine idles in neutral.
• Engine Start-up and Shut-down sounds play when the engine is initially
powered on or is powered off for five seconds or more.
RailKing® SD70ACe Diesel Ready-To-Run Set w/Proto-Sound® 3.0
(If Equipped)
Bell Bell Bell
Bell Bell Bell
®

Ditch Lights

=
Bell
(On/Off)
=
Bell Bell
™
18
Reset
Two Horn Blasts
(indicates change is made)
Repeat to Return
to Normal Condition