Table of Contents
Advertisement
SC812L Chassis Manual
4-7
Installation Step 5: Installing the Air Shroud
Figure 4-9: Air Shroud for SC812L Chassis
Air shrouds concentrate airfl ow to maximize blower effi ciency. The SC812L ac-
cessory package includes the air shroud used by most motherboards. Alternate
air shrouds are available for purchase. Check the motherboard documentation for
more information
To install the air shroud:
Place the air shroud in the chassis. The air shroud fi ts behind the two blowers
closest to the power supply.
To check the server air fl ow
1. Make sure there are no objects to obstruct airfl ow in and out of the server. In
addition, if you are using a front bezel, make sure the bezel's fi lter is replaced
periodically.
2. Do not operate the server without drives or drive trays in the drive bays. Use
only recommended server parts.
3. Make sure no wires or foreign objects obstruct air fl ow through the chassis. Pull
all excess cabling out of the airfl ow path or use shorter cables.
The control panel LEDs inform you of system status. See "Chapter 3: System
Interface" for details on the LEDs and the control panel buttons.
4-10
Advertisement
Table of Contents
