Chassis Setup and Maintenance
4-1
Overview
This chapter covers the steps required to install components and perform
maintenance on the chassis. The only tool you will need to install components and
perform maintenance is a Phillips screwdriver. Print this page to use as a reference
while setting up your chassis.
4-2
Installation Steps
4-3
4-4
4-5
4-6
4-7
Review the warnings and precautions listed in the manual be-
fore setting up or servicing this chassis. These include infor-
!
mation in Chapter 2: System Safety and the warning/precau-
tions listed in the setup instructions.
Chapter 4: Chassis Setup and Maintenance
Chapter 4:
4-1