Trycom Technology TRP-C29U User Manual page 44

Send Command:"01 46 2A 00".......Read TRP-C24's safe mode value.
Response:"01 46 2A 12 "...Safe mode value is "12 ".
Error Response: "01 C6 00"......Error code.
10-15. System stand by (Host OK!)
Command ID 46 2F 00 (CRC)
ID
Syntax
46
Description
2F
00
Response No Response
10-16.Set up single channel and latch status
Command ID 05 SS NN DD 00 (CRC)
ID
Syntax
05
Description
SS
NN
DD
00
Response ID 05 SS NN DD 00 (CRC)
ID 85 FF (CRC)
Address of setting module 1~247
Function Code
System stand by
Reserved code
Address of setting module 1~247
Function Code
SS = 00 Set up single channel output
SS= 01 ->Clear latch status (NN=0, DD=0)
SS= 02 ->Clear single channel counter value(DD=00)
NN=00~07=DO0~DO7
Digital output value DD=00 disable, DD=FF enable
Reserved code
Command valid
Watchdog mode status
44