Trycom Technology TRP-C29U User Manual page 33

8-24. Save current digital output status to power on or safe mode
Example:
Send Command:"#010013"...set up digital output CH7~CH0" to "0001 0011"
Response:" !01"....... . Command valid!
Then Send Command :" ~015P"....Set the power on mode ,After power fail or reset , The
module will load current DO status.
8-25. Save current digital input /output status
Example:
Send Command:"#**".......... Save current digital IO status of all modules on line.
8-26.Read synchronized data
33