Trycom Technology TRP-C29U User Manual page 32

*If watchdog is in enable , send the Host Ok!"command before watchdog timeout (B) the
watchdog will re-count, PWR LED will flashing after watchdog timeout.
8-23.Read power on/safe value
Command ~ID4V(CHK)(cr)
~
ID
Syntax
4
description
V
CHK
(cr)
Response !IDABCD
?ID(CHK)(cr)
Example:
Send Command:~014S..........Read safe mode digital output status.
Response:" !01080F".......... . Command valid, safe mode digital IO status is "080F".
First Leading code
Address of setting module 00-FF(HEX)
Read power on or safe mode I/O status
V=P: Power on mode I/O status
V=S: Safe mode I/O status
Checksum
Carriage return
AB=DO0~DO7
CD=DI0~DI7
Command invalid
32